Construct the washbasin your self - detailed directions and sensible suggestions
Home / Bathroom Design / Construct the washbasin your self – detailed directions and sensible suggestions

Construct the washbasin your self – detailed directions and sensible suggestions

Washstand classic

If you are creative, like to master something in your free time and love the challenges, you may like the idea of ​​making a washstand yourself. Of course, this task is not easy, but in this article you will find detailed instructions and many practical tips on how to build a washbasin yourself. I wish you success!

Build the washbasin yourself – practical tips

Vanity with two sinks

Washstand classic

Washbasin made of wood

Vanity wood original design

DIY vanity

Washbasin Wooden washbasin made of porcelain

If you want to build a washbasin yourself, you must know that the task is difficult and time-consuming. The effort is definitely worth it and you will find satisfaction in the work, because you have the opportunity to do something useful yourself. In addition, a homemade vanity with its original look can quickly become an eye-catcher in the interior of the bathroom or the kitchen. The following instructions describe in detail the construction of a washbasin. Follow the steps to get a nice result!

Necessary tools and materials

Vanity purist dark wood

If you want to build a washstand yourself, you need many tools and materials. The power tools you need are:

  • jigsaw
  • Cordless Screwdriver
  • Random Orbit Sander
  • Fine Spray
  • drilling machine
  • sinker
  • abrasive paper
  • eraser
  • Pencil and folding rule

And all the necessary materials from which the washbasin is made are: large glued-wood board, medium-density fiberboard, squared timber, countersunk screws, chair angle or bar handle and wood varnish. Of course you can find everything at the hardware store as well as professional advice that can help you.

Build the washbasin yourself

Washstand rustic

Step 1: Join middle side and upper bottoms

Washbasin build yourself instructions

DIY washstand determine the location of the parts

If you have already got everything you need, we will start building the washbasin. First, you should connect the two upper floors and the middle side together. To do this, place the three parts in the shape of a double-T and mark the back edges with pencil to later know which part goes where. Then find the center cross-line of the two floors – on it the holes for the screwing of the middle side lie. Then drill two holes in each floor and use the cordless screwdriver to attach the construction.

Step 2: Connect the body parts

Build a washstand yourself. Draw outlines

connect the body parts together

connect the carcass parts

Then you should connect the body parts together. Put the third floor and the double-T on their visible edges. Use the pencil to mark their position and then draw their outlines on both sides of all three floors. Drill three holes in the middle of the outline so that the floors can be screwed into the sides. For this purpose you need the cordless screwdriver again. To bolt the back wall, use the same principle: position it as you want to mount it and draw the outlines of the bottom and middle floor. Drill five holes in the middle of the outline and mount with countersunk screws.

Step 3: Mount the cover plate

Build washbasins yourself, assemble the cover plate

DIY washstand cover plate and cover mount

Vanity itself build practical tips

The next step is to mount the cover plate – it is screwed from below through the top floor. In the rear area you should fasten the plate to the sides with chair angles. The washbasin still needs a shutter to cover the drainage installation of the basin. It is attached flush to the leading edges as well with angles. To do this, lay the entire structure on its back: the distance between the panel and the outside edge of the right side and between the bottom edge of the panel and the panel should be 5 mm. Finally, cut the opening for the washbasin into the cover plate.

Step 4: Connect the drawer parts

connect the drawer parts together

DIY washstand instructions to connect the drawer parts

What’s left is to connect the drawer parts with screws. The use of a drilling template is highly recommended in order to correctly position the holes. Align the drawer parts with the top side down. Then drill two holes for the screws in the sides of the front and back sections. Finally, drill two small holes in the front of the drawer to assemble a handle. The drawer is already finished!

Step 5: Final finishing work

DIY washstand grind the wooden surfaces


Washbasin build yourself final paint finishes clear

Build the washbasin yourself

Finally, you should sand the wooden surfaces, apply stains with the fine spray system and finally varnish them clear. Finished! It is not obligatory that you build exactly one vanity. A completely normal one DIY wooden table will give a touch of country house to your bathroom. Be inspired by ours Design ideas with wood vanity top. If you found this post interesting, you will definitely like our other DIY projects and instructions ,

Wooden washbasin: other inspirational ideas

Build the washbasin yourself

Wooden vanity with two sinks

Vanity and sink wood ideas and inspirations

Washstand made of driftwood porcelain sink

large vanity sink made of porcelain

Vanity puristic design

Vanity with drawers

Solid wood washbasin ideas and inspirations

Washstand dark wood

Washbasin in country style

Vanity puristic design

creative design ideas vanity

Vanity purist dark wood

Washbasin itself build ideas and inspirations

interesting vanity driftwood

Vanity wood classic design

Washstand driftwood

Check Also

The new trend for the bathroom: concrete look

The brand new development for the toilet: concrete look

Anyone who likes industrial furniture and who likes minimalist design simply builds with concrete! The …